To build your own poker table, you need several materials. For a DIY poker table, you'll need to be able to read plans, have some basic carpentry skills, and also to be able to handle upholstering. Spray your tabletop with adhesive and add the speed cloth. Place your speed cloth playing-side down on a flat surface. Spray each section of the speed cloth’s underside with your adhesive. Lift your playing surface up, and gently lower it, playing-side down, on top of the speed cloth.

Make Your Own Poker Table Topper

Make Your Own Poker Table Topper

Building your own specialized poker table can be profitable. With all the right tools and materials, you can build your own poker table for less than $ 400. Make the job easier, invest in a high strength folding table that will be the basis of your poker table. All other materials can be purchased at your local hardware store or a local exit poker factory.

Place the birch or oak wood on your work table. Place the default table on the top of the plywood with the top surface of the board facing down. Make sure that the surface is square dead in the center of the table. For an 8-foot table plan, you must measure 12 inches at each end and 6 inches on each side to center the table. Use a pencil to draw around the table by default so you get a visual image of the table where it should be on the bottom. Remove table by default.

12 Picture Gallery: Ideas for Build a Poker Table

Draw one or more arcs at the end of the plywood. To make this drawing, the easiest chain kites tape on a pencil and hold one end of the string at the center point of the table and hold with the pencil in the other hand. Use a 12-inch chain between the center point and the pencil.

This post topic: Furniture